DrawSpec is a precision manufacturing partner for aerospace and defence programmes. Machined components, avionics assembly, UAS airframes and MRO — every part engineered against a drawing, every drawing answered by a record.
Five-axis milling and turning for airframe, actuation and engine-adjacent hardware. In-process probing with archived measurement data on every setup.
LRU assembly, harness fabrication and functional test on an ESD-controlled floor. Every unit serialised; every test step logged and dispositioned.
Composite and metallic UAS airframes with payload-bay and ground-control integration for civil and commercial applications.
Teardown, repair, overhaul and return-to-service with life-limited-part tracking and configuration control across the fleet.
Quality management structured on the AS9100-series framework — risk-based thinking, configuration management, counterfeit-parts prevention and first-article inspection.
REF: SCOPE & ISSUING BODY — ON REQUEST · VERIFY BEFORE CONTRACTSurface finishing, heat treatment and NDT controlled as special processes: qualified operators, frozen parameters, periodic surveillance.
REF: ACCREDITATION DETAILS — AFTER COMPLIANCE REVIEWApproved-vendor sourcing, incoming inspection and full traceability for every serialised item entering stores.
REF: SUPPLIER AUDIT REPORTS — UNDER NDANOTE 01: Certification scopes, issuing bodies and certificate numbers are programme-sensitive. They are provided under NDA to qualified enquiries — contact the quality directorate to verify current status. This page intentionally lists frameworks, not certificate claims.
| Rev | Date | Description of change | Approved by |
|---|---|---|---|
| C | 2026-Q3 | Updated compliance wording; added end-use screening step | Compliance Officer |
| B | 2026-Q1 | Added UAS integration scope; special-process matrix refreshed | Quality Director |
| A | 2025-Q4 | Initial issue — framework-based quality description | Managing Director |
| Material | Typical use | Processes | Traceability |
|---|---|---|---|
| AL 6061 / 7075Plate · bar · forging | Airframe brackets, housings, UAS spars | 5-axis milling · turning · anodising | Mill cert per batch |
| TI 6AL-4VPlate · bar | High-load actuation and structural parts | 5-axis milling · NDT as applicable | Heat-lot locked |
| CRES 15-5 / 17-4Bar · investment casting | Fasteners, fittings, engine-adjacent hardware | Turning · passivation | Heat-lot locked |
| INCONEL 718Bar · forging | High-temperature engine-adjacent components | Milling · turning · NDT | Full lot history |
| CARBON PREPREGWoven · UD | UAS airframes, fairings, panels | Layup · autoclave · trimming | Roll & cure record |
NOTE 03: Material certifications, supplier approvals and process qualifications are programme-specific. Provided under NDA after compliance review. Special processes are NADCAP-aligned; accreditation details on request.
Composite and metallic UAS platforms for surveying, inspection, logistics and civil security — engineered from the drawing board, built under the same documentation discipline as our crewed work.
Incoming inspection, serial verification and configuration baseline locked before induction.
Controlled disassembly with torque records, defect tags and photographic evidence at each station.
Approved repair schemes, LLP replacement and special-process routing as applicable.
Acceptance testing against approved procedures — customer witness on request.
Release package compiled, dual-signature review, asset returned with complete records.
Records archived for the life of the programme. Audit-ready at any future date.
Our compliance programme is designed to be consistent with applicable export control regimes, including ITAR and EAR where they apply to our commodities and geographies.
Approved suppliers only. Every serialised item traceable to its source, consistent with AS9100-series expectations.
Programme names, volumes and end customers are disclosed in detail after compliance review. Published summaries below.
Machined structural components supporting commercial airframe programmes under long-term agreements.
Composite airframes and payload integration for civil unmanned platforms. Demonstrators for qualified customers.
Repair and overhaul flow for mechanical engine accessories, with LLP tracking and digital work packages.
Machinists, engineers and inspectors who treat documentation as seriously as dimensions. Apprenticeships and certification pathways available.
★ NOW HIRING — 5 POSITIONSNOTE 02: Some positions may require security clearances or controlled-person status under applicable law. All offers conditional on background verification. — HR
Describe the commodity, the quantities and the end use. Every enquiry is screened by export compliance before it reaches engineering.
Submit RFQ →