Est. 1998 · Licence SF-4471-E · ISO 9001 / 45001 / 14001
Structural, civil, mechanical and electrical engineering under one roof — modelled, fabricated and installed by a single accountable team, from foundation bolt to final commissioning.
00 / Practice
Most projects fail in the gap between trades. SteelFrame keeps structural, civil, mechanical and electrical analysis inside one model and one contract, so a beam penetration is resolved in the drawing rather than discovered on site.
42 chartered engineers, 9 BIM technicians and our own fabrication yard under one QA system.
Every package coordinated to LOD 400 — the single biggest lever on programme certainty.
Buildability and lifting reviews at design stage; independent monthly site audits thereafter.
01 / Services
Each discipline is led by a chartered principal engineer and delivered against the same QA system, so a steel connection, a cable pull and a duct route are all documented to the same review gate.
Frames that are economical to erect and honest about their load path — modelled, analysed and connection-detailed in-house.
Ground to platform: earthworks, drainage, retaining structures and the infrastructure that keeps a site dry and level.
HVAC, pumping, piping and process plant — sized, coordinated, fabricated and pressure-tested as one installation.
LV/MV distribution, earthing, standby power and the control systems that let the building be operated, not just energised.
02 / Project portfolio
Nine representative schemes from the last four years. Filter by discipline — every project below was engineered, fabricated or installed by our own teams.
9 schemes shown
38-storey composite frame with a 62 m clear-span transfer truss over the podium road.
Discuss a similar build
Seismic upgrade and temporary works design for a 1912 foundry retained in full operation.
Discuss a similar build
Diagrid roof over a 9,400-seat arena, erected in 14 night-time crane lifts over a live venue.
Discuss a similar build
480,000 m³ bulk earthworks, 4.2 km of drainage and platform formation for eight warehouses.
Discuss a similar build
Three-level underground interchange box with top-down excavation and contiguous piling.
Discuss a similar build
Six ammonia refrigeration plant rooms, 1.9 km of pre-insulated pipework and full pressure testing.
Discuss a similar build
2,400 t of process steelwork fabricated and welded to ISO 3834-2, with full NDT traceability.
Discuss a similar build
11 kV ring replacement across a live terminal with zero unplanned crane downtime.
Discuss a similar build
42,000-point building management system integrated over a live 24/7 airport concourse.
Discuss a similar buildNo schemes in this discipline yet — ask us for the reference list.
03 / Safety record
Reported against 3.2 million site man-hours in the last rolling year, verified by our independent safety auditor. Every figure below is a rolling twelve-month measure, not a best year.
0.41
TRIR
Total recordable incident rate per 200,000 hours — industry benchmark 2.90.
3.24M
Man-hours worked
Across 34 active sites and 2 fabrication yards in the last 12 months.
1,847
Days LTI-free
Since our last lost-time incident — five years and counting, company-wide.
0.68
EMR
Experience modification rate, three-year average. Below 1.00 qualifies for reduced premiums.
04 / Equipment fleet
HK$ 780M of owned plant, maintained in-house and tracked with telematics. Where we own the crane and the piling rig, the lifting window is ours to protect — not a hire desk's.
Every lifting appliance carries a current thorough examination certificate; registers are issued to the client at mobilisation and on each re-inspection.
05 / Certifications
Certificates are held by SteelFrame Engineering Group and cover design, fabrication and site installation. Current copies are issued with every tender submission.
Quality management
Design, fabrication and site installation of structural, civil and M&E works under a single audited quality system.
Occupational health & safety
Company-wide OH&S management system covering all sites, yards, workshops and temporary works.
Environmental management
Waste, water, noise and carbon reporting across active sites, with published annual reduction targets.
Execution of steel structures
Highest execution class for structural steelwork, with CE marking and factory production control to FPC 4.
Fusion welding quality
Comprehensive quality requirements for fusion welding, covering WPQRs, welder qualification and NDT records.
Welder & procedure qualification
Procedure and personnel qualification for pressure and structural welding, with third-party witness records.
06 / Quote request
Tell us the discipline, scale and location. A principal engineer reviews every enquiry — you get a named contact, an indicative range and a programme view, not a brochure.
Project enquiry
Fields marked * required
Sent from your browser only
In a live build this is where the request would post to your estimating inbox. Below is a copy of what would have been sent.